Free Standing Sprue Separators

SM-SA Drum Separator

The SM/SA drum separator is available in either automatic or manual version both with option to include a mechanical speed invertor. These units are used for separating of components from sprues at the side of the moulding machine or can be located in a central area and fed via a bulk-feed conveyor.

The automatic version (SA) means quick and simple set up with the adjustment of just one roller and by use of a planetary gear systems automatically the other rollers are adjusted to the same gap.

SM-SA Drum Separator Specification

SAV Vibratory Sprue Separators

The SAV like the drum separator can be used at either the side of the moulding machine or a central location being conveyor fed. The method of separation is through the use of a vibratory motor and tubes which allow the sprue and the parts to be separated easily.

The separator can be mounted on telescopic support legs to allow for both height and tilt adjustment.

The separation section is made of stainless steel 30mm dia tubes with a pitch that can be easily adjusted.

The infeed and output chute are manufactured in stainless steel with the outlet opening to discharge products directly into a box

SAV Sprue Separator Specification

SAS Sprue Separators

The SAS sprue separator is an adjustable roller separator used at the moulding machine generally in conjunction with an existing conveyor. If used in conjunction with a Virginio Nastri CBD swan neck conveyor with fitted paddle separator will allow the separation of multiple components of different shapes from the sprue in two stages.

SAS Sprue Separator Specification

Duck Separator

The Duck sprue separator is used for the filling of multiple containers or boxes allowing "lights out" operation. These can be used in conjunction with side by side Virginio Nastri CPS box carousel units giving more than 16 stations.

Duck Sprue Separator Specification