The combi-series from ISVE is a unique system combining both a four shaft shredder and a granulator cutting chamber to enable you to take a large waste product, shred it into reduced pieces and then granulated into the particle size you require. They are useful when you are tight for space - large mouldings in and regrind out no need for conveyor! .
Combi 40/80s & 4030 engin plast granulator
Combi 60/80s & 4030 engin plast granulator
Combi 80/80s & 6040 engin plast granulator
Characteristics of shredder:
- Very thick welded sheet steel support;
- Support for barrel roller bearings with sealing system against dust and liquids;
- Anti-wear interchangeable side plates with separating interspace of the cutting chamber from bearing-holder flanges;
- High thickness shafts with 20 special anti-wear steel cutters and 20 conveyor disks to facilitate gripping of bulky objects;
- Graduated arrangement of cutter teeth for better taking and cut progress;
- No.2 epicyclical reduction gears with rotation axes parallel to the cutter axis;
- No.2 multi-voltage and multi-frequency motors of 7,5 KW 6 poles with PREMIUM efficiency class (IE3);
- Drive system in oil bath with steel gears and pinions;
- 400x800 mm cutting chamber;
- Electro-welded sheet metal hopper for front or top loading fitted with sliding cover and anti-fly-back rubber protections.
Characteristics of Engin Plast 4030 Granulator:
- Steel support structure made in electro-welded tubular for the housing of the Engin Plast 4030 granulator.
- 400mm x 450mm Throat Opening
- 400mm x 300mm Cutting Chamber
- 300mmØ Rotor
- Scissor Cut Action
- Rapid Knife Change System
- 3 Rotating Knives
- 2 Fixed Knives
- 15kW Motor – (450RPM)
- Toothed Drive Belts - Flywheel
- Up to 160-270kg/hr Throughput (material depending)
- 10 mm Screen
- Compressed Air Self Clean Cutting Chamber
- Fully Soundproofed – RAL7032 Beige
Characteristics of control system:
- Electrical board built according to CEE rules and provided with power limiting device inverting cutters motion in the case the working charge of the machine is higher than the programmed value;
- SIEMENS S7-1200 PLC for the control of all the plant peripheral units.
- 6’’ colour touch screen display to adjust all the machine parameters and control peripheral units.
- Software arranged to control loading systems, refining grinder, and suction plant.
- Emergency control functions for stopping the plant in the case of accidental introduction of ferrous material.
- ISVE MAINTENACE PROGRAM: it signals the ordinary maintenance interventions at their expiry date.
- PREDISPOSITION FOR REMOTE-ASSISTANCE AND “SAFETY SERVER CONNECTION ISVE” (real-time supervision of the parameters from server ISVE);
- The production of material in grain form varies in relation to the type of piece to be round and the size of the round items required. On an average it is possible to produce between 250 to 400 Kg per hour.
- Made to CE standards.
The production of material in grain form varies in relation to the type of piece to be round and the size of the round items required. On an average it is possible to produce between 250 to 400 Kg per hour.
The unit is made up of a model 60/80S shredder group working in line with an Engin Plast 4030 granulator.
Characteristics of shredder:
- Very thick welded sheet steel support;
- Support for barrel roller bearings with sealing system against dust and liquids;
- Anti-wear interchangeable side plates with separating interspace of the cutting chamber from bearing-holder flanges;
- High thickness shafts with 30 special anti-wear steel cutters and 30 conveyor disks to facilitate gripping of bulky objects;
- Graduated arrangement of cutter teeth for better taking and cut progress;
- No.2 epicyclical reduction gears with rotation axes parallel to the cutter axis;
- No.2 multi-voltage and multi-frequency motors of 11 KW 6 poles with PREMIUM efficiency class (IE3);
- Drive system in oil bath with steel gears and pinions;
- 600x800 mm cutting chamber;
- Electro-welded sheet metal hopper for front or top loading fitted with sliding cover and anti-fly-back rubber protections.
Characteristics of Engin Plast 4030 Granulator:
- Steel support structure made in electro-welded tubular for the housing of the Engin Plast 4030 granulator.
- 400mm x 450mm Throat Opening
- 400mm x 300mm Cutting Chamber
- 300mmØ Rotor
- Scissor Cut Action
- Rapid Knife Change System
- 3 Rotating Knives
- 2 Fixed Knives
- 15kW Motor – (450RPM)
- Toothed Drive Belts - Flywheel
- Up to 160-270kg/hr Throughput (material depending)
- 10 mm Screen
- Compressed Air Self Clean Cutting Chamber
- Fully Soundproofed – RAL7032 Beige
Characteristics of control system:
- Electrical board built according to CEE rules and provided with power limiting device inverting cutters motion in the case the working charge of the machine is higher than the programmed value;
- SIEMENS S7-1200 PLC for the control of all the plant peripheral units.
- 6’’ colour touch screen display to adjust all the machine parameters and control peripheral units.
- Software arranged to control loading systems, refining grinder, and suction plant.
- Emergency control functions for stopping the plant in the case of accidental introduction of ferrous material.
- ISVE MAINTENACE PROGRAM: it signals the ordinary maintenance interventions at their expiry date.
- PREDISPOSITION FOR REMOTE-ASSISTANCE AND “SAFETY SERVER CONNECTION ISVE” (real-time supervision of the parameters from server ISVE);
The production of material in grain form varies in relation to the type of piece to be round and the size of the round items required. On an average it is possible to produce between 300 to 450 Kg per hour.
Characteristics of shredder:
- Very thick welded sheet steel support;
- Support for barrel roller bearings with sealing system against dust and liquids;
- Anti-wear interchangeable side plates with separating interspace of the cutting chamber from bearing-holder flanges;
- High thickness shafts with 42 special anti-wear steel cutters and 42 conveyor disks to facilitate gripping of bulky objects;
- Graduated arrangement of cutter teeth for better taking and cut progress;
- No.2 epicyclical reduction gears with rotation axes parallel to the cutter axis;
- No.2 multi-voltage and multi-frequency motors of 11 KW 6 poles with PREMIUM efficiency class (IE3);
- Drive system in oil bath with steel gears and pinions;
- 800x800 mm cutting chamber;
- Electro-welded sheet metal hopper for front or top loading fitted with sliding cover and anti-fly-back rubber protections.
Characteristics of Engin Plast 6040 Granulator:
- 600mm x 650mm Throat Opening
- 600mm x 390mm Cutting Chamber
- 400mmØ Rotor
- Scissor Cut Action
- Rapid Knife Change System
- 3 Rotating Knives
- 2 Fixed Knives
- 22kW Motor – (448RPM)
- Toothed Drive Belts - Flywheel
- Up to 300-550kg/hr Throughput (material depending)
- 12 mm Screen
- Compressed Air Self Clean Cutting Chamber
- Fully Soundproofed – RAL7032 Beige
Characteristics of control system:
- Electrical board built according to CEE rules and provided with power limiting device inverting cutters motion in the case the working charge of the machine is higher than the programmed value;
- SIEMENS S7-1200 PLC for the control of all the plant peripheral units.
- 6’’ colour touch screen display to adjust all the machine parameters and control peripheral units.
- Software arranged to control loading systems, refining grinder, and suction plant.
- Emergency control functions for stopping the plant in the case of accidental introduction of ferrous material.
- ISVE MAINTENACE PROGRAM: it signals the ordinary maintenance interventions at their expiry date.
- PREDISPOSITION FOR REMOTE-ASSISTANCE AND “SAFETY SERVER CONNECTION ISVE” (real-time supervision of the parameters from server ISVE);
The production of material in grain form varies in relation to the type of piece to be round and the size of the round items required. On an average it is possible to produce between 500 to 700 Kg per hour.
