Renmar Stock

 
CONVEYORS

Virginio Nastri CB/2 Incline Conveyor with 20mm flights 
700mm Horizontal Section
1300mm Incline Section
320mm Useable Belt Width
436mm Overall Width
1035mm Discharge Height
1864mm Overall Length
20mm Flights @ 500mm Pitch
Blue PU Belt
Belt Speed 4m/min
3 Phase – 400v – 50hz Drive

Virginio Nastri CBD/8 Swan Neck Conveyor with paddle separator
700mm Lower Flat Section
1300mm Incline Section
750mm Upper Flat Section
320mm Useable Belt Width
436mm Overall Width
832mm plus 280mm Adjustment Discharge Height
2605mm Overall Length
Blue Non Slip Belt
SAP Paddle Separator
Belt Speed 4m/min
3 Phase – 400v – 50hz Drive

 

MOULD HEATERS

AEC ECU100 9kw Mould Heater
Pump Motor - 1HP
Flow Rate – 132 ltr/min @ 2.0 bar
Eurotherm Control with Indicator/Warning Light
Pressure Gauges To/From Process
Temperature Range 0° - 120°C
9 kW Stainless Steel Heater
1.5” BSP Process Water Outlets
1/4” Solenoid Valve
3/400/50 – 16 AMP

DOSERS

Renmar DVS06-MS Doser
0.03kW drive motor
6 Litre Capacity Hopper
Dosing Rate 0.05 – 1.5kg/hr
Screw Size 8mmØ x 8mm Pitch
Integrated control, with external signal connection
240/1/50

LOADERS

Renmar AMS/4 Single Phase Loader with VPS40 Proportional Valve
950W motor
4 Litre Capacity Hopper
Built-In Filter Clean
Upto 70kg/hr Local Pick Up
Complete with 40mm Ø suction probe & 3m flexible hose
Stainless Steel Body
Integrated control
240/1/50

DRYERS

Renmar DES115 Dehumidifying Dryer with TRS150 Hopper   (rent-to-buy option available)
Twin Desiccant Bed – Single Blower 
80m3/hr Air Flow
TRS150P Litre Capacity Drying Hopper (100kg)
Hinged Access Door For Cleaning
Drying Temperature 150°C
Stainless Steel Body Hopper
Mounted on Trolley with drop box and suction probe
400/3/50

Renmar MDS80P Compressed Air Dryer with AVS-1 Compressed Air Loader   (rent-to-buy option available)
80 Litre Hopper Capacity
1000W motor
Compressed Air
Antistress System  
-50 Degrees Max Dew Point
6-25 m 3/h
Complete with trolley


GRANULATORS

Ex-demo Engin Plast 4030 Granulator with Cyclone   (rent-to-buy option available)
400mm x 450mm Throat Opening
400mm x 300mm Cutting Chamber
300mmØ Rotor
Scissor Cut Action
Rapid Knife Change System
3 Rotating Knives
2 Fixed Knives
15kW Motor – (450RPM)
Toothed Drive Belts - Flywheel
Up to 160-270kg/hr Throughput (material depending)
10 mm Screen
Compressed Air Self Clean Cutting Chamber
Fully Soundproofed – RAL7032 Beige
Brand new Blower Evacuation – 1.1kW to Cyclone
38 hours of operating/demo time